Owner manual
19
4.7.2 Monitoring output
The SmartMatriX Ultra has one monitoring output module.
This module contains one output with the following plugs:
- 3G/HD/SD-SDI (2 x BNC),
- Analog Computer/Video (HD15),
- Dual-Link DVI-I (DVI-I),
- Analog SDTV (4 × BNC: Composite, YC, YUV, RGBS).
Please see the formats available on the output:
Please see the output formats of the monitoring output:
Please note that SDTV and EDTV are not available on the standard output module and require the monitoring output module.
Output Type Signal
Analog Computer/Video Ouput
HDTV
Computer
Analog HDTV
Analog Computer
DVI-I Dual-Link Output
HDTV
Computer
Digital HDTV
Digital Computer
3G-SDI Output HDTV Digital HDTV
Dual Video Opcal SFP Module HDTV Digital HDTV
Output Type Signal
Video Y/C Output SDTV Analog SDTV
Video Y Pb Pr Output SDTV Analog SDTV
Video RGBSTTL Output SDTV Analog SDTV
Analog Computer / Video Output
SDTV
EDTV
HDTV
Computer
Analog SDTV
Analog EDTV
Analog HDTV
Analog Computer
DVI-I Dual-Link Output
SDTV
EDTV
HDTV
Computer
Digital SDTV
Digital EDTV
Digital HDTV
Digital Computer
SD-HD-3G-SDI Output
SDTV
HDTV
Digital SDTV
Digital HDTV
A RS-232 compliant link is available through a DB-9
connector. It is only used for maintenance purpose.
4.8
4.8.1 Serial interface
Link Baud rate
RS-232 Link Will depend on debug applicaon