Owner manual

34
7.3.8 Output management
Into the output secon, you will be able
to manage your output resoluons,
formats, sync types, test paerns, etc...
On the SETUP > OUTPUT TAB, the
following screen will appear.
A short summary of each output sengs appears on the main
page. You can see the number of outputs, their resoluon rate
and HDCP status.
Select an output to adjust by either clicking on it from the column
on the le, or clicking the conguraon cog for that output.
7.3.8 Output management
Once the individual output Setup page is opened, you have access to:
 Choose the output resoluon format.
 Choose the signal ming standards.
 You can choose the type of output synchronizaon on the analog plug, for example RGsB for sync on
green, or RGBHV for separate H and V sync wires.
 You can rename your output, for example “Projector 1”.
 The status menu will show you the current output status.
 A selecon of paerns are available to test your output. These paerns will overwrite any
input selecon that you might have. Most paerns oer adjustment to isolate a parcular color for easier
troubleshoong and calibraon.
You can choose from:
• – turns the paern o.
•  – displays grey bars