Manualshelf

Product Manual

ManualsBrandsAnalytic Systems ManualsSolar & Wind Power20A, 48V Out, 85 - 264 VAC PFC In, AC/DC Battery Charger, 2 Bank, IP66
11121314151617181920
1312
BCA ONLY LEDS
EQUALIZE [1]
THE BATTERY TEMPERATURE SENSOR MUST BE INSTALLED TO USE THIS FUNCTION
This LED glows red when the unit is performing an Equalize cycle. This LED blinks red when
the unit is waiting for a battery to nish charging before performing an Equalize cycle.
BATTERY OVER TEMP [2]
THE BATTERY TEMPERATURE SENSOR MUST BE INSTALLED TO USE THIS FUNCTION.
This LED glows red when the battery’s temperature is above the safe limit, the unit will then
turn OFF its outputs as precaution. Once the battery temperature is within the safe operating
range, the unit will automatically resume operation
Operational Indicators
This unit features seven indicator LEDs on its front panel to display the unit’s operating
condition. The meanings of these LEDs are detailed below. For more information on the LEDs
relating to alarm conditions, see Troubleshooting.
STANDARD LEDS
POWER ON [3]
This LED glows green when the unit is connected to an AC power source and turned ON.
CHARGING[4]
This LED glows green when the unit is currently charging a battery. This LED turns off when
the connected battery is fully charged. The charger will maintain the battery at the oat volt-
age for as long as it is connected.
OVERTEMP [5]
This LED glows red when the unit’s internal temperature is above the safe limit, the unit will
then turn OFF its outputs as a precaution. Once the internal temperature is within the safe
operating range, the unit will automatically resume operation.
LOW VOLTAGE OUTPUT [6]
This LED glows red when the output voltage is too low to properly charge the battery, the unit
will then turn OFF its outputs as a precaution. Once the unit detects the output voltage is
within the normal operating range, it will automatically resume operation.
LOW VOLTAGE INPUT [7]
This LED glows red when the input voltage is too low for proper operation, the unit will then
turn OFF its outputs as a precaution. Once the unit detects the input voltage is within the
normal operating range, it will automatically resume operation.