INSTALLATION & OPERATION MANUAL IPSi305W/Y INTELLIGENT PURE-SINE INVERTER An ISO9001 Registered Company Battery Chargers • Inverters • Power Supplies • Voltage Converters 101-8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA) www.analyticsystems.
INVERTER IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS — This manual contains important safety instructions for operating the Inverter. INVERTER PRECAUTIONS 1. Do not expose the Inverter to rain or snow unless it is a sealed model. 2. Do not use any attachments with the Inverter unless recommended or sold by the manufacturer, this may result in a risk of fire, electric shock, or injury to persons. 3.
TABLE OF CONTENTS • Front Cover, Product Photo and Title • Product Warnings and Advisories • Table of Contents • Introduction / Box Contents • Main Parts • Operation • Controls and Indicators • Installation • DC Connections / AC Connections • Offline UPS Option • InverterWizard • Troubleshooting • Specifications • Warranty Copyright Analytic Systems Ware (1993) Ltd.
Introduction The IPSi305W series of Intelligent Pure Sinewave Inverters are designed specifically for powering computers and other sensitive AC loads in rugged, mobile, off-grid environments. They produce pure sinewave AC power, identical to a conventional AC outlet. Built for service in high-moisture environments this unit features watertight seals and connectors and is built to meet the IP66 rating. For additional protection, the IPSi305Y units are tested and certified to meet the IP67 rating.
Main Parts 1 2 4 3 5 Front Panel 1. Remote Control Connection Port 4. Power Switch 2. AC Output Connection: CNLINKO YM-20-J03SX-01-001 connector c/w protective cover 5. DC Input Connection: CNLINKO IP67 YM-20-C02SX-01-001 connector c/w protective cover 3.
Operation This unit is designed for simple operation. Before operating, the inverter must be properly installed and connected. See Installation and AC/DC Connections for more information. TO OPERATE THE INVERTER: 1. Move the Power Switch to ON to energize the circuitry. 2. The Invert LED and either the 50 Hz or 60 Hz LED will glow green indicating proper operation and the presence of AC power at the outputs. 3.
Operational Indicators There are eight LED indicators on the inverter’s top chassis which display the unit’s operating condition. The table below details their meaning: LEDs LOW VOLTAGE Meaning • Blinks red when the input voltage nears the minimum limit for operation. • Glows red when the input voltage is too low for operation. The Bypass LED will also glow red and the Invert LED will turn off. • The shutdown and start-up thresholds for the low voltage alarm can be adjusted using InverterWizard.
Installation MOUNTING Mount the unit in a WELL VENTILATED area. Allow at least one inch (2.54 cm) of clearance all around the unit for adequate cooling. The IPSi305W is built to meet the IP66 rating, for protection again high-pressure water spray. Each IPSi305Y is tested and certified to meet the IP67 rating for protection against submersion. Please take this into consideration when choosing a mounting location. CAUTION: DO NOT MOUNT THE UNIT ANYWHERE EXPLOSIVE GASES CAN ACCUMULATE.
DC Connections IMPORTANT: BEFORE CONNECTING OR DISCONNECTING ANYTHING TO THE INVERTER, THE POWER SWITCH MUST BE TURNED OFF. DC INPUT CONNECTION This unit is equipped with an CNLINKO IP67 YM-20-C02SX-01-001 connector with protective cover to serve as a DC Input Connection. Connect the DC power source here using wiring suitable for the input amps. The maximum input amps can be found on the unit’s top panel label and also in the Specifications section.
Off-line UPS (Optional) The Off-line UPS (Uninterruptible Power Source) option allows the inverter to function as a backup power source in the event of external AC power failure. NORMAL OPERATION AC Power Source • The AC power source supplies AC power to both the battery charger and the load (Running through the inverter’s off-line). • The battery charger supplies DC power to a battery, maintaining it at full charge. This battery is connected to the inverter’s DC Input Connection(s).
InverterWizard (Optional) InverterWizard is optional software that can be used to adjust the inverter’s operating settings. InverterWizard is free-to-download from www.analyticsystems.com or available by emailing sales@analyticsystems.com Using InverterWizard, you can: • • • • • • Set the inverter’s output frequency to either 50.00 or 60.00 Hz. Adjust the inverter’s output voltage over a ±10% range in 1 VAC intervals. Set the voltage thresholds for the low voltage alarms.
Troubleshooting This unit features eight LED indicators and an alarm buzzer to help diagnose any malfunctions during operation. In the event of malfunction, the alarm buzzer will sound prior to the inverter shutting down. You should immediately check which LEDs are glowing to determine the cause of the malfunction. TIP: FOR QUICK REFERENCE, IF THE UNIT IS EXPERIENCING A MALFUNCTION: THE INVERT LED WILL BE OFF AND THE BYPASS LED WILL BE GLOWING RED.
Specifications Input -12 -20 -40 Nominal Voltage 12 VDC 24, 28, 32, or 36 VDC 48 or 72 (Rail) VDC Actual Voltage 10.5-18 VDC 19 - 48 VDC 39 - 84 VDC Input Amps (Max.) 49 A 24 A 12 A Input Fuse (Internal) 2x 30A 32 VDC Blade Mini 1x 30A 58 VDC Blade Mini 1x MDA - 15A fuse Under Voltage Input Alarm Shutdown Range 10.5-14 VDC (Default setting: 10.
General Length 13.0 in / 32.8 cm Width 8.0 in / 20.3 cm (Including mounting flanges) Height 3.3 in / 8.3 cm Clearance 1.0 in / 2.5 cm Weight 16.0 lb / 7.
Limited Warranty 1. The equipment manufactured by Analytic Systems Ware (1993) Ltd. (the “Warrantor”) is warranted to be free from defects in workmanship and materials under normal use and service. 2. This warranty is in effect for: a. 3 Years from date of purchase by the end user for standard products offered in our catalog. b. 2 Years from date of manufacture for non-standard or OEM products c. 1 Year from date of manufacture for encapsulated products. 3.
DESIGNED AND MANUFACTURED BY 800-668-3884 604-946-9983 Support@analyticsystems.com Battery Chargers • Inverters • Power Supplies • Voltage Converters www.analyticsystems.com 101-8128 River Way Delta, BC V4G 1K5 | Canada Register Products Online | www.analyticsystems.
