27, Digital-ro 27ga-gil, Guro-gu, Seoul, Korea RS4 Wireless Adapter Card User Guide Version 1.1 June.
7, Digital-ro 27ga-gil, Guro-gu, Seoul, Korea Revision History Release Date Revision 1.1 2014-06-06 First release.
27, Digital-ro 27ga-gil, Guro-gu, Seoul, Korea STATEMENT and Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
27, Digital-ro 27ga-gil, Guro-gu, Seoul, Korea This device is intended only for OEM integrators under the following conditions: • The antenna must be installed such that 20 cm is maintained between the antenna and users, and • The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.
27, Digital-ro 27ga-gil, Guro-gu, Seoul, Korea CE Hereby declares that this WiFi module is in compliance with the essential requirements and other relevant provisions of R&TTE Directive 1999/5/EC. The standards for complying are as following: ETSI EN 301 489-1 V1.9.2: 2011-09 ETSI EN 301 489-17 V2.2.1: 2012-09 ETSI EN 300 328 V1.8.1:2012-06 ETSI EN 301 893 V1.7.1: 2012-06 EN 62311: 2008 EN 60950-1:2006+A11:2009+A1:2010+A12:2011 This is a class B product.
CONTENTS Package Contents .................................................................................................... 7 Chapter 1 Introduction ........................................................................................... 8 1.1 Overview of the Product ............................................................................................ 8 1.2 Features.....................................................................................................................
RS4 Wireless Adapter Card Package Contents The following items should be found in your package: ¾ RS4 Wireless Adapter Card Conventions: The ‘Module’ mentioned in this user guide stands for PW-MN5275 WLAN Adapter Card without any explanation.
RS4 Wireless Adapter Card Chapter 1 Introduction Thank you for choosing the RS4 Wireless Adapter Card! 1.1 Overview of the Product The Module is an OEM module (35x35mm) based on the IA3S4. It is a compressed wireless digital audio transceiver operating in the 2.4GHz bands.
RS4 Wireless Adapter Card Chapter 2 Linux Installation Guide (For Consumer Electronics) 2.1 Hardware Installation For the Consumer Electronics products which use RS4, it must provide a corresponding connector for the module. After connecting the module to the device, the hardware installation is finished. 2.2 Software Installation For the Consumer Electronics products, the Linux Driver of RS4 is embedded in default. So the module is a plug and play device.
RS4 2.
RS4 Wireless Adapter Card Appendix A: Specifications Normal Interface FPC connector Radio Data Rate 2Mbps Modulation GFSK Frequency 2.403 ~ 2.478GHz Operating Voltage 3.0Vdc to 3.6Vdc, Normal is 3.3Vdc Safety & Emissions FCC/ IC, CE Environmental and Physical Operating Temp. 0℃~55℃ Humidity 10% ~ 90% RH, Non-condensing Product Dimensions 35.0* 35.
