User's Manual

22
an overvIew of the menu structure**
Installation [select installation location]
|
–› *
†
Shelf Mount [select when set on a flat surface]
|
–› Wall Mount [select when mounted to a wall]
Subwoofer [select subwoofer configuration]
|
–› *
†
No Sub [select when not using a subwoofer]
|
–› Wired Sub [select when attaching a sub via a cable]
|
–› Wireless Sub [configure a wireless subwoofer]
|
–› Sync Subwoofer [sync wireless sub receiver]
|
–› Turn Wirless Sub Off [deactivate wireless sub transmitter]
Bass Level [adjust bass level in 2dB increments]
|
–› +10dB through –10dB [*
†
default = 0dB]
Surrounds [configure surround options for 5.1-channel sources]
|
–› O f f [turns off simulated surrounds]
|
–› *On [use simulated surrounds at normal level]
|
–›
†
+6dB [increases level of simulated surrounds +6dB]
Stereo Mode [configure options for 2-channel stereo sources]
|
–› Wide [creates a wider stereo image]
|
–› *
†
Voice+ [simulates a center channel for stereo sources]
** Some menu options may vary depending on manufacturing date.
an external subwoofer, you must choose either a
wireless connection or a wired connection. Your
soundbar does not simultaneously output via both
connections. The soundbar can connect to only
one wireless subwoofer. However, it is possible to
connect multiple wired subwoofers if you utilize a
‘Y’ splitter attached to the subwoofer cable, or if
your subwoofer offers an output designed to daisy
chain multiple subs.
Subwoofer > No Sub: This option configures
the soundbar to handle all bass information and
will not output information via the subs wired or
wireless subwoofer connections. Activate by press-
ing the enter button and the soundbar will respond
with ‘Saved’.
Subwoofer > Wired Sub: This option con-
figures the soundbar to use an external subwoofer
connected via a cable to the soundbar’s Sub Out
RCA connection. Activate by pressing the enter but-
ton and the soundbar will respond with ‘Saved’.
With this option, the wireless sub transmitter is
turned off.
Reference your subwoofer’s manual to learn
how to properly adjust the sub’s level and phase
controls to achieve proper blending with the sound-
bar. The subwoofer’s crossover should be set to
“bypass” or “LFE”. For subwoofers that do not have
a “bypass” or “LFE” crossover setting, we recom-
mend adjusting the crossover to its highest setting.
Subwoofer > Wireless Sub: Enter the sub-
menu by pressing the enter button. Here you can
sync the soundbar to the subwoofer wireless receiv-
er (included with your soundbar).
Reference your subwoofer’s manual to learn
how to properly adjust the sub’s level and phase
controls to achieve proper blending with the sound-
bar. The subwoofer’s crossover should be set to
“bypass” or “LFE”. For subwoofers that do not have
a “bypass” or “LFE” crossover setting, we recom-
mend adjusting the crossover to its highest setting.
Subwoofer > Wireless Subwoofer >
Sync Subwoofer: This option connects the
soundbar to the Subwoofer Wireless Receiver.
Start syncing by pressing the enter button. The
soundbar will display ‘Push and Hold Button’.
Press and hold the subwoofer wireless receiver’s
sync button. Connection is successful when the sta-
tus light turns solid and the soundbar responds with
‘Synced’.
Subwoofer > Wireless Sub > Turn
Wireless Sub Off: This option configures the
soundbar to handle all bass information and, when