User's Manual

26
Power Settings > Power Standby
> Always On: This option configures the
soundbar to remain on at all times until it is
manually turned off using the power button
on the control panel or remote control. Activate
by pressing the enter button and the soundbar will
respond with ‘Saved’.
Power Settings > Power-On Volume: Enter
the submenu by pressing the enter button. Here you
can configure the default volume of the soundbar
when it powers on or comes out of standby.
Power Settings > Power-On Volume >
Set: Enter the submenu by pressing the enter but-
ton. Here you choose set the power-on volume.
Power Settings > Power-On Volume >
Set > –90dB to +10dB: Using the up/down
directional buttons, choose the desired volume
level. Once set the soundbar will always be set
to this level when it powers on or comes out of
standby. The default level is –35dB.
Power Settings > Power-On Volume >
Last Used: When Power Standby is set to “Last
Used”, the soundbar will power on or come out of
standby at a volume level matching the volume set-
ting when it was powered off or went into standby.
Power Settings > IP Control: Enter the
submenu by pressing the enter button. Here you
can turn IP Control off or on. IP Control allows the
soundbar to respond to incoming IP commands
from networked home control systems connected
via Ethernet.
Power Settings > IP Control > Off or
On: This option turns the IP Control feature off or
on. Activate by pressing the enter button and the
soundbar will respond with ‘Saved’.
Power Settings > Standby IP Control: Enter
the submenu by pressing the enter button. Here you
can turn Standby IP Control off or on. This allows
you to configure how the soundbar responds to
incoming IP commands when it is in standby mode.
Power Settings > Standby IP Control >
Off or On: This option turns the Standby IP Control
feature off or on. Activate by pressing the enter but-
ton and the soundbar will respond with ‘Saved’.
When this setting is set to “Off” the soundbar will
not respond to incoming IP command when it is
powered off or in standby mode. If IP Control is set
to Off, Standby IP control is disabled.
MENU OPTION: LEARN REMOTE
Please note: There may be remotes that the soundbar
cannot learn or that the soundbar can not learn cor-
rectly. Due to the number of available remotes, it is
impossible to advise which remotes will or will not work.
Please note: When learning from a second remote,
you will likely find it does not have buttons that directly
correspond with all available soundbar commands.
Not all commands have to be programmed. Some
remotes offer ‘function’ buttons (F1, F2, etc.) that can
be used to program unique soundbar commands such
as ‘Bass Mode: Night’ or ‘Input: Optical 1’.
Please note: Some remote controls offer discrete
‘power on’ and ‘power off’ buttons. Some offer
a single button to toggle power on and off. The
learning function of the soundbar allows you to
program either scenario.
Learn Remote: Enter the submenu by pressing
the enter button. The settings in this menu program
the soundbar to respond to a second remote con-
trol. The factory supplied remote control will always
work with the soundbar, even if the soundbar is pro-
grammed to respond to a second remote.