User Manual for VOP13082E VOP13082B VOP13082D VOP13082C Revision Description of changes Note 1.0 Created 17 July.
Table of Content 1. Introduction ................................................................................................................................................... 3 2. Specifications ................................................................................................................................................. 3 Quick overview of Specification. .................................................................................................................
1 Introduction This product is VOP13082C, and there are 3 types of different products optionally as VOP13082B, VOP13082D and VOP13082E. 2 Specifications Quick overview of Specification. Manufacture Product Name Model Name Device OS FW Supporting Band Interface Power supply voltage Power Consumption Dimensions Environment Operating Storage Design Life Country of origin Anam Electronics Co., Ltd.
Technical Specification Items Description CPU RAM ROM Wired LAN MAC PHY USB Vender/ Parts Number Operated frequency Type Bit length Operated Frequency Memory Size Type I/O interface speed Memory size Number of Ports Vender/ Parts Number Vender/ Parts Number Type of standards Mediatek/MT8516 1.3 GHz DDR3 16 bit 800 MHz 512MB NAND SLC 25ns/Read Cycle Time 1 GB 1 Mediatek/MT8516 Texas Instruments/DP83822 IEE 802.3u Number of Ports Vender/ Parts Number Type of standard Bus Power 2 Mediatek/MT8516 USB2.
3 Mechanical overview Mechanical Dimension The maximum mechanical form factor of the module is shown below.
4 I/O specification 80 pin connector The 80 pin connector provides all I/O and power supply to the module.
5 Wireless Specification Installed radio system chip (MT7668) includes dual band (2.4GHz & 5GHz) WiFi and Bluetooth. Wi-Fi Item Specification Wi-Fi chip 2x2 MIMO: MT7668 Connection to main CPU SDIO Media Access Protocol Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) with ACK Remarks 2400-2483.5MHz(1-11ch) 2400-2497MHz(1-11ch,13ch,14ch) 5150-5250MHz (W52) Frequency range 5250-5350MHz (W53) 5470-5725MHz (W56) 5745-5825MHz (W58) DFS support Modulation IEEE802.
IEEE802.11a: -90dBm@6Mbps, 72dBm@54Mbps IEEE802.11n(HT20):-67dBm@MCS7 IEEE802.11n(HT40):-64dBm@MCS15 IEEE802.11ac(VHT80): -60dBm@MCS9 Security Authentication: Open system, Shared Key, WPA/WPA-PSK, WPA2/WPA2-PSK 802.1x (PEAP, TLS, TTLS) Encryption: WEP(64,128bit),TKIP,AES Wi-Fi Protected Access(WPA2,WPA) support WPS Compliant IEEE Standard Compliance IEEE802.11n IEEE802.11g IEEE802.11b IEEE802.11a IEEE802.11ac Bluetooth Item Specification Interface SDIO Operating Frequency 2.4 - 2.
FCC & IC Statement FCC ID : MBBVOP13082E FCC Statement: FCC Part 15C 15.247, 15E 15.407 is applied to the modular transmitter. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
USERS MANUAL OF THE END PRODUCT: The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.
IC Statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d.
following IC statement is required to be available in the users manual: IC statement is required to be available in the users manual: This device complies with Industry Canada license-exempt RSS standard(s). This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
6 Module Type There are 4 types of module. The following table describes core component difference. Module Type RF Wi-Fi/BT VOP13082B VOP13082C VOP13082D VOP13082E YES YES YES YES 80pin BtoB conn YES YES YES YES 42pin BtoB conn.
Appendix - Module Functional Block Diagram 15