Quick Guide
Table Of Contents
- 1.0 Introduction
- 2.2.3 Camera Live Menu Function Introduction
- 3.0 Wi-Fi Wireless
- 4.0 Remote Access Setup
- 5.0 Camera Settings
- 6.0 Troubleshooting
- 7.0 Installation Instruction
- 7.1 3G Solar Camera Install
- 18 -
2.5 Live View (using Internet Explorer)
When using the camera for the first time on a PC with Internet Explorer, your PC will ask you for permission to
install the viewing software (called ActiveX). This ActiveX is needed to decode the H.264 or MPEG4 video stream and
control the camera. Click to “OK” this at the top of your screen, then again click on “OK” on the install menu that will
pop up in the middle of your screen.
If you have a popup blocker like Google Toolbar you will need to disable it. Within a few seconds you can then see live
video from the camera.
NOTE: If the camera shows video but also displays the message “connecting, waiting…”, close Internet Explorer and
wait a couple of minutes for the camera to obtain current time from a internet time server and restart itself.
The two links at the top of the screen are Home and Settings.
[Home] This takes you back to your Camera Homepage.
[Settings] This will take you to the cameras internal settings.
Please view the next page for an explanation of the Operating Bar settings.