Quick Guide

- 21 -
3.0
Wi-Fi Wireless
Most likely your wireless network was set up with a password (also known as wireless key). If you don’t remember
it, you can check your router’s wireless setup menu or ask the person who set up your wireless network.
Without your password you cannot proceed with your camera’s wireless setup, so you can either continue to use
your camera in wired mode or set up a new password in your router. Another possibility is to disable passwords in your
router but an unsecured wireless network is not recommended.
After installing the camera setup utility on PC and assigned the fixed ip address for your ip camera on Mac, now
you can start using your camera immediately using the IP address. Just add http:// in front of it and open it in a
browser, such as http://192.168.168.120
Clicking on “setting” from the main camera login screen will get you to this:
Click on “Network”, then click on “Wireless setup”, and you’ll get to this screen :