Quick Guide
Table Of Contents
- 1.0 Introduction
- 2.2.3 Camera Live Menu Function Introduction
- 3.0 Wi-Fi Wireless
- 4.0 Remote Access Setup
- 5.0 Camera Settings
- 6.0 Troubleshooting
- 7.0 Installation Instruction
- 7.1 3G Solar Camera Install
- 63 -
5.7.4 NAS STORAGE SETUP
[NAS remote path] This is the address & path where to save the files on NAS Drive (up to a maximum of 2
directory levels).
[Authorization1] Select whether authentication is required by the NAS Drive.
[User name] & [Password] Type the user name and password of the NAS Drive. This field is required if your
NAS Drive requires authentication.
Click Apply to confirm your setting.
Please note : After the setting on “Storage“ and Micro-SD card or NAS status is ready. You can go to next chapter
“Task”, and configure motion detection to initiate the snapshots or video recording to Micro SD card or NAS.
5.7.5 Browse Storage
Clicking on Browse Storage will take you to the following screen where you can view or download the contents of
the storage drive.
The resulting video files can be viewed with the free QuickTime for Windows or Mac. You do not need QuickTime X or Pro
unless you want to compress the resulting video to iPhone/iPod format. Shorter video clips will download much faster. If
you have many video files you could also remove the Micro SD card and access it directly from your computer (with
suitable adapter if needed). This is only practical for indoor cameras due to easy accessibility of the Micro SD card slot at
the bottom.