Quick Guide

- 5 -
2.0 Installation
2.1Pre-requisites and Initial Connection
1. Mini indoor models, Indoor models, Mini bullets outdoor , bullets outdoor , 3G bullets outdoor models, 3G indoor
models, mini spy cameras ,3G spy Camera, DVS.
2. Windows PC or Mac OS or Linux computer with internet browser
Computer is only required for initial setup, later the camera can work by itself without any computer present at
the camera location
3.
A local area network with a router / gateway and an available Cat5 wired network jack on your router (not on
your computer)
The wired network connection is only needed for initial setup, later the camera can be used wireless with
802.11b/g/n. If no Cat5 jack is available, please see Appendix B for alternative setup procedure.
You can start using the camera on your own network almost as soon as you plug it in.
1. Just connect the included blue Cat5 cable to the network jack on the camera and connection the other end to one
of the LAN jacks of your router
2. then connect the power supply to the camera and to a wall plug. If your camera has a removable antenna, you
may want to attach it now.
IMPORTANT: Make sure camera is plugged into your router/ Airport Extreme/ Time Capsule, not the computer, even
if your computer has an available Cat5 LAN jack.