Quick Guide
Table Of Contents
- 1.0 Introduction
- 2.2.3 Camera Live Menu Function Introduction
- 3.0 Wi-Fi Wireless
- 4.0 Remote Access Setup
- 5.0 Camera Settings
- 6.0 Troubleshooting
- 7.0 Installation Instruction
- 7.1 3G Solar Camera Install
- 82 -
Wait 3-5 minute till the warning message “ Caution ! Upgrading Firmware! Please don’t turn off power or reset the camera till firmware
upgrade successfully” displayed.
Till warming message above displayed, then Wait 2-3 minutes again till the message. After the upgrade completes, you
will be prompted “ Firmware upgrade successfully, reboot now ?” to reboot the camera, then click “reboot”, after this
your latest firmware will be recorded.
You can check the camera firmware version in camera “system” ,which is on the top of the right corner .you will get to
the screen . If your firmware upgrade succeed, then the firmware version will be updated.