Quick Guide

- 9 -
Sometimes the program may take a few minutes to find your camera, so if your camera isn’t displayed, wait a few
moments and then click “Search” to search for cameras again.
[Search] – Searches your local network for cameras.
[Browser] - Select the required camera and click Browser to access the camera via a web browser.
[Clean] - Click clean to clean up the searched cameras .
[Setup] - Select the required camera and click Setup to configure the network settings for the camera.
Anytime you lose the IP address of your camera, you can run the Setup software to easily find it
again. Once your camera is displayed, either chose “Search” to find the camera.
Please note: The camera setup will only detect cameras that are on the same network as your computer. Ensure
the camera is plugged into the same router/network switch that your computer is connected to
2.2.3 Camera Live Menu Function Introduction
After install this software , doule click on the utility , and sure your camera is connected to your computer or internet .
Here are 2 ways for you to searched your connected cameras with it . First , click on to add the camera ,