Installation Manual

Table Of Contents

AD510 Update

Step 1: Link to the website:

https://www.anceltech.com/support/download

Find the AD510 Software upgrade files,and download to your computer(Supports Win7, Win 8, Win10,

and XP system. )

Step 2: Please extract the file:

It must be the (WinRAR.rar) Convert into a (file folder), and open the AD510_Upgrade

file folder.(It’s very important. If you don't do this you will not be able to upgrade the

device)

→

PAGE 1
AD510 Update Step 1: Link to the website: https://www.anceltech.com/support/download Find the AD510 Software upgrade files,and download to your computer(Supports Win7, Win 8, Win10, and XP system. ) Step 2: Please extract the file: It must be the (WinRAR.rar) Convert into a (file folder), and open the AD510_Upgrade file folder.(It’s very important.
PAGE 2
Step 3: Open the folder and install "uplink.exe.
PAGE 3
Step 4: Once you hit finish, you will see the “Uplink”software on desktop and then open the “Uplink” software. Step 5: When you see this page, please hold down any button on the device continuously and then connect the device to PC via a USB cable(That's very important), then let go of the button when "Update Mode" displays on the device screen. Finally, click “Check Update” to finish the Upgrade.
PAGE 4
Step 6: Once the update is complete, the scanner will beep once and say "Update Success.