Instructions for Use
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer
- Visit our website at
- For Technical Assistance, send us email at
- One-Year Limited Warranty
- Safety Information
- Table of Contents
- 1Using This Manual
- 2Introductions
- 3Getting Started
- 4.Vehicle Identification
- 5Diagnostic Operations
- 6Steering Angle Sensor (SAS) Calibration
- 7OBDII/EOBD Operations
- 8System Setup
- 9Update
11
AD610 Plus ABS & Airbag Reset Tool Manual_English_V1.02
Figure 3-2 Sample Input Text Screen
2.
Scroll with the arrow keys to highlight your desired letter or number and press the ENTER key to
confirm.
Figure 3-3 Sample Numeric Keyboard Screen
3.
To delete a letter or number, use the function key Cursor Forward to move the cursor to it and
then press the Backspace button.
4.
When finished the entry, press Completed key to continue.
4.
Vehicle Identification
This section illustrates how to use the scanner to identify the specifications of the vehicle under test.
The vehicle identification information presented is provided by the ECM of the vehicle being tested.
Therefore, certain attributes of the test vehicle must be entered into the scan tool to ensure the data
displays correctly. The vehicle identification sequence is menu driven, you simply follow the screen
prompts and make a series of choices. Each selection you make advances you to the next screen.
Exact procedures may vary somewhat by vehicle. It typically identifies a vehicle by any of the
following means:
●
Automatic VIN reading
● Manual VIN entry
● Manual vehicle selection
NOTE
Not all identification options listed above are applicable to all vehicles. Available options may vary by
vehicle manufacturer.