Instructions for Use
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer
- Visit our website at
- For Technical Assistance, send us email at
- One-Year Limited Warranty
- Safety Information
- Table of Contents
- 1Using This Manual
- 2Introductions
- 3Getting Started
- 4.Vehicle Identification
- 5Diagnostic Operations
- 6Steering Angle Sensor (SAS) Calibration
- 7OBDII/EOBD Operations
- 8System Setup
- 9Update
21
AD610 Plus ABS & Airbag Reset Tool Manual_English_V1.02
●
Present/Permanent/Current Codes
●
Pending Codes
● History Codes
Present/Permanent/Current codes stored in a control module are used to help identify the cause of a
trouble or troubles with a vehicle. These codes have occurred a specific number of times and indicate
a problem that requires repair.
Pending codes are also referred to as maturing codes that indicate intermittent faults. If the fault does
not occur within a certain number of drive cycles (depending on vehicle), the code clears from
memory. If a fault occurs a specific number of times, the code matures into a DTC and the MIL
illuminates or blinks.
History codes are also referred to as past codes that indicate intermittent DTCs that are not currently
active.
To read codes from a vehicle:
1.
Scroll with the arrow keys to highlight Read Codes from Function Menu and press the ENTER key.
A code list including code number and its description displays.
Figure 5-10 Sample Function Menu Screen
2.
Use the up and down arrow keys to scroll through data to select lines, and left and right arrow keys
to scroll back and forth through different screens of data.
Figure 5-11 Sample Code Screen
3.
Press function key Save to store DTC information. Press function key Freeze Frame to view freeze
data.