Instructions for Use
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer
- Visit our website at
- For Technical Assistance, send us email at
- One-Year Limited Warranty
- Safety Information
- Table of Contents
- 1Using This Manual
- 2Introductions
- 3Getting Started
- 4.Vehicle Identification
- 5Diagnostic Operations
- 6Steering Angle Sensor (SAS) Calibration
- 7OBDII/EOBD Operations
- 8System Setup
- 9Update
22
AD610 Plus ABS & Airbag Reset Tool Manual_English_V1.02
Figure 5-12 Freeze Data screen
Freeze Frame Data: a snapshot of critical vehicle operating conditions automatically recorded
by the on-board computer at the time of the DTC set. It is a good function to help determine what
caused the fault.
4.
Use left and right arrow keys to scroll back and forth through different screens of data.
5.
Press function key Save to store freeze frame information. Or use the BACK key to exit.
5.2.3 Clear Codes
Clear Codes menu lets you to clear all current and stored DTCs from a selected control module. Also
it erases all temporary ECU information, including freeze frame. So make sure that the selected
system is completely checked and serviced by technicians and no vital information will be lost before
clearing codes.
NOTE
●
To clear codes, make sure that the ignition key is switched to ON with the engine off.
●
Clear Codes does not fix the problem that caused the fault! DTCs should only be erased after
correcting the condition(s) that causedthem.
To clear codes:
1.
Scroll with the arrow keys to highlight Clear Codes from Function Menu and press the ENTER key.
Figure 5-13 Sample Function Menu Screen
2.
Follow the on-screen instructions and answer questions about the vehicle being tested to complete
the procedure.