Instructions for Use
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer
- Visit our website at
- For Technical Assistance, send us email at
- One-Year Limited Warranty
- Safety Information
- Table of Contents
- 1Using This Manual
- 2Introductions
- 3Getting Started
- 4.Vehicle Identification
- 5Diagnostic Operations
- 6Steering Angle Sensor (SAS) Calibration
- 7OBDII/EOBD Operations
- 8System Setup
- 9Update
28
AD610 Plus ABS & Airbag Reset Tool Manual_English_V1.02
Figure 5-24 Sample Function Menu Screen
2.
A group selection screen, test selection screen, several step-by-step instruction screens, or bi-
directional control screen may appear. Read the screens and follow all instructions. If necessary,
use the function keys to perform commands or answer any questions. If more than 3 function
keys displays, use up and down arrow keys to select a command and press the ENTER key to
confirm.
Figure 5-25 Sample Special Function screen
3.
When completed, press the BACK key to return to previous screens.
NOTE
Not all function options listed above are applicable to all vehicles. Available options may vary by the
year, model, and make of the test vehicle.
6
Steering Angle Sensor (SAS) Calibration
SAS Calibration menu lets you perform calibration of the steering angle sensor, which permanently
stores the current steering wheel position as straight-ahead in the sensor EEPROM. On successful
calibration of the sensor, its fault memory is automatically cleared.
To start a test:
1.
Scroll with the arrow keys to highlight SAS from the main menu and press the ENTER key.
Figure 6-1 Sample Main Menu Screen
2.
On each screen that appears, select the correct option and then press the ENTER key. Read the
screens and follow all instructions to complete the test.