Installation Manual

Table Of Contents

ANCEL FX2000 Upgrade Guide

There are 2 methods to upgrade the FX2000 scan tool, method 1(Via TF Card) and method 2( Via

USB Cable). Here's the upgrade guide following for method 2(Via USB Cable).

Step 1: Before starting the upgrade, please connect this device to a computer via the USB cable,

and make network connection stable. (It supports WIN XP, 7, 8, 10 operating systems.)

Step 2: Link to ANCEL website (Register & Log in).

https://anceltech.com/account/register

PAGE 1
ANCEL FX2000 Upgrade Guide There are 2 methods to upgrade the FX2000 scan tool, method 1(Via TF Card) and method 2( Via USB Cable). Here's the upgrade guide following for method 2(Via USB Cable). Step 1: Before starting the upgrade, please connect this device to a computer via the USB cable, and make network connection stable. (It supports WIN XP, 7, 8, 10 operating systems.) Step 2: Link to ANCEL website (Register & Log in). https://anceltech.
PAGE 2
Step 3: Download the update software on a computer. https://anceltech.com/support/download Step 4: Click the software and install the update tool.
PAGE 3
(2) Step 5: Find this software on your computer and open it.
PAGE 4
Step 6: Select connection mode “USB” and click “OK” to continue. The "Product Serial Number" will be read automatically, then hit “Device Upgrade”. Step 7: Move to the register page, type your email address and Register Code will be read automatically, then hit “Submit”.
PAGE 5
Step 8: Choose “Select All” and click “Download” to start downloading.
PAGE 6
Step 9: When the 2 progress bars reach 100%, the upgrade completes. Click “Quit” and disconnect the USB cable. How to check if the FX2000 has installed the latest software? Connect the FX2000 to a computer and open the update tool. If the local version is the same as the latest version, it has installed the latest version of the software.