Safety precautions To avoid body injury and damage to the device or your car, please read this manual carefully before using VD700. The testing process described In the manual Is generally the experience of technician. Safety precaution Is required In most of the process to avoid body Injury and damage to the device or your car. Read the vehicle maintenance manual before use this device and follow safety precautions. It generates CO and other poisonous air when engine is running.
1. coverage: 3. Appearance and buttons description 1) Support vehicles for VV, AUDI, SODA, SEAT and BENTLEY fe. 2) Supports all VW diagnostic protocols: UDS, TP20, TP16, KWP2000 and KWP1281 Supports all BROBDINGNAG protocols : VPW, PWM, ISO, KWP 2000 and CAN 2.
1) LCD DISPLAY — Indicates test rests. Backbit, 320 x 240 pixels display. 2) [OK] BUTTON — Confirms a selection (or action) from a menu. 3) ESC BUTTON — Cancels a selection {or action) from a menu or rectums to the menu. 4) [LEFT SCROLL BUTTON —in the menu mode through the menu and sub menu move to the left, when rolling in a data interface, use the left button can be moved to the last screen.
22 System Selection: 2.2.1 Choose [ System Selection ], click [ Common System], Sal ant Mani 8 Common System ey g a All Systems transmission Contra, 0003 -Brakes 1 | Ei Select one system to test, more operations, please refer to 2.1.1 102.13 02-Read Fault Nudes 03 -Trans Fault Codes 2.2.2 Choose [ All System ], the screen displays all support. ed systems, then select one systems to test. Select Mani 8 | Common System el § onto! Mad transmission Cont.
Choose one of special functions, such as [Service Reset]. Press [ OK] to continue: Shari aha Flexible Interval Fixed interval Choose [Flexible Interval], It displays as follows: Sahel axis Services Reset ne rE CH:42 Min Fixed interval Min Time Starveling. . Min Time Interval:73 sags: x Silage: 15000 BH:45 all Dual :50 Fixed Mississauga 81 Fixed Tums intervals. :51 Fixed Tami interval:73.
Retract the brake pump , please pay attention to the operation tips, and press [OK] button to continue: EPA RepiaceSrakePads Hiss boa perform, Rapists he boss pads. Pray 104 to core. Aor ria, Prose [0K] to contact. Sn Pious anal om plats satisfaction. Cross [04] ta continue. 3.1.1 Check whether the brake pump Is completely released. The operation of replacing the brake pads Is finished, press OK] to complete Pious check contraindication, tier check Pres [OKI 10 contains. 3.
3.3 Choose [Release Brake Pump] , press | OK] to continue: TTT EH RupincaBrakar ins Retraction Brake Pump Release Brake Pump Es 3.3.1 Release Brake Pump, and press [ OK] to continue: en Et Prensa shack compliant rises Haw baas pastes, pres [0K] to core. After iah, pra [0K] to canting. ET 4. Battery Registration Chooses [ BMS reset] option , press [OK] button. The screen displays as follow: Hater Registration ae TT 6016-Battery Regulation GBC Battery Ens ray Cont. 4.
Has bun pomander, Press (0K) tn sonnies. 5. OBADIAH diagnosis 5.1 Road Codes Stored codes are also known as "hard codes” or "permanent codes”. These codes cause the control module to illuminate the malfunction Indicator lamp {MIL} when an emission-related fault occurs. Pending Codas ars also referred to as "maturing codes” or "continuous monitor codes”. It Indicates the problem that control module has detected during the current or last driving cycle, but they are not considered seriously.
2) Awaking message comes up asking for your confirmation. Clearasil Melanesian-Raiaisd Diagnostic Information, Ara You wr? 3) Press [OK] to confirm. Please Tum ignition ON wh Engine Of, Pres OK key io antivirus! Emission Rested Dietetics Information has bans careered] 5.3 IM Readiness 1/M refers to Inspection and Maintenance, that Is legislated by the Government to meet federal clean-ale standards. /M Readiness Indicates whether or not the various emissions-related systems.
6.5 Skin Style Choose Unit of measures and it displays as follows: poe = i ‘constructionist's at Starr) Unit of Master 6.6 Feedback 1) When the [OBADIAH] function shows connected error with vehicle, please using the feedback function. Choose [Feedback] and lt displays as follows: reset Banger Automatic recording s ee, Institutionalization st stripper) perform the related functions. pr En disconnect the car, connect to ihe computer via USB use the. Next : Press EXIT Button and rectum to the main menu.
Please send the feedback bin file to 6.7 Device information Choose Device Information and It displays as follows: er otters Torsion: ingtrucHionsDinpiey of sia) Library Varanasi: visitor Unt of Mani 1.00500 Skin Sari Russia: Fovdkack ANCELIDTTOSI0TZSESH 7. Update 1. Download update software 2. Connect the device with computer through USB cable. 26 3. The update software ls only supported by 7/8/10. * Windows 8/10 can run update software directly, * Click "Install driver.