Specifications

MADE IN USA
SIX YEAR WARRANTY
Liberty Platinum Sound System Owners Manual
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
3
CONTROLLING FEEDBACK
Feedback, a howling noise or shrill sound, is self-generated by the sound system. It’s caused by
a microphone picking up the sound coming from the speaker and then re-amplifying it. Once a
feedback loop starts, it continues until the system is adjusted.
FEEDBACK CAUSES
• Microphonetooclose,pointingtowards
or in front of speaker
• Volumesettingistooloudforroom
• Soundreectingoffhardsurfaces
AVOIDING & ELIMINATING FEEDBACK
• Pointmicrophoneinadifferentdirection
• Keepmicrophoneawayfromthespeaker
• PlacespeakerinFRONTofthemicrophone
• Reducethesoundsystemvolumelevels
CAUTION: Feedback can damage your equipment & may be hazardous to hearing.
CORRECT SYSTEM PLACEMENT WRONG SYSTEM PLACEMENT
UNPOWERED COMPANION SPEAKER
One powered Liberty sound system and one unpowered Liberty companion
speaker. Using a speaker cable (SC-50NL) connecttheSPEAKEROUTPUTjack
on the powered system to the IN jack on the unpowered speaker.
POWERED SOUND SYSTEMS
Two or more powered Liberty Sound Systems. Using a speaker cable
(EX-50PP)
connect the LINE OUT jack on the first powered Liberty to the LINE IN jack on
the second powered Liberty. Set second Liberty volume to maximum so full
volume control will be at the first or primary sound system.
CONNECTING MULTIPLE SOUND SYSTEMS
NOTE: AC power is not required for an unpowered companion speaker.