Specifications

MADE IN USA
SIX YEAR WARRANTY
Beacon® Sound System Owners Manual
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
3
CONTROLLING FEEDBACK
Feedback, a howling noise or shrill sound, is self-generated by the sound system. It’s caused by
a microphone picking up the sound coming from the speaker and then re-amplifying it. Once a
feedback loop starts, it continues until the system is adjusted.
FEEDBACK CAUSES
• Microphonetooclose,pointingtowards
or in front of speaker
• Volumesettingistooloudforroom
• Soundreectingoffhardsurfaces
AVOIDING & ELIMINATING FEEDBACK
• Pointmicrophoneinadifferentdirection
• Keepmicrophoneawayfromthespeaker
• PlacespeakerinFRONTofthemicrophone
• Reducethesoundsystemvolumelevels
CAUTION: Feedback can damage your equipment & may be hazardous to hearing.
CORRECT SYSTEM PLACEMENT WRONG SYSTEM PLACEMENT
BEACON TRAVEL DOLLY
Beacon Portable sound systems are equipped with a
removable Travel Dolly which features wheels and a
retractable handle. To eliminate possible vibration from
effecting the performance of your unit, we recommended that
you remove the Travel Dolly before operating the system.
TOP BRACKET
RETRACTABLE HANDLE
(CLOSED)
RELEASE
PEDAL
BOTTOM BRACKET
REMOVING TRAVEL DOLLY
1. Press & hold the spring-loaded Release
Pedal located on the Bottom Bracket
2. Swing the dolly bottom away from
the system
3. Lift Handle up to remove dolly from the
Top Bracket
Reverse steps to reattach the dolly