Specifications

MADE IN USA
SIX YEAR WARRANTY
Beacon® Sound System Owners Manual
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
EXTERNAL ACCESSORY
VOLUME CONTROL
USING THE BUILT-IN MP3 PLAYER
Your MP3 player supports WMA and WAV files as well as
MP3. Input slots for play are USB, SD card slot and AUX
port for other music player devices.
Insert your memory card or USB stick and turn on the
MP3 POWER. Push MODE button until your device is dis-
played. The auxilliary port becomes active when 3.5mm
cable is inserted.
The LCD displays functions as used:
POWER: press once for ON or OFF
MODE: displays mode of operation
MUTE: press once for mute ON and again to
mute OFF
RPT: press and release to repeat song
TRACK+: press and release to next track
TRACK-: press and release for previous track
ALBUM+: press and release for next album or hold and
release until correct album is found
ALBUM-: press and release for previous album or hold
and release until correct album is found
CHANNEL SELECTION - BUILT-IN RECEIVER
Select a channel, set the built-in receiver & microphone transmitter
to that channel before using your wireless system.
1. Choose any available wireless channel/
frequency from 1 thru 16
(see page 5 for transmitter instructions)
2. Set the Wireless Channel Selector Knob to the channel/
frequency you choose in step 1
WIRELESS 2
VOLUME CONTROL
WIRELESS 1 CHANNEL
SELECTION
WIRELESS 1 RX
INDICATOR LIGHTS
WIRELESS 2 RX
INDICATOR LIGHTS
WIRELESS 1
VOLUME CONTROL
WIRELESS 2 CHANNEL
SELECTION
DIVERSITY WIRELESS BY ANCHOR AUDIO
Anchor Audio UHF wireless is a 16 channel, diversity wireless system that receives signals with two independent antennae. With diversity
wireless the receiver processes the stronger signal, effectively minimizing dropouts and interference from other transmitting sources. The
antennae are mounted internally so there are no obstructions or risk of damage.
NOTE: Ongoing wireless interference? The frequency you selected may be in use by other systems in the area!
Change channels until you find a clear frequency!
If you have two wireless receivers repeat above for the second receiver.
Remember, each receiver/transmitter pair must be set to different
channels to avoid interference.
4