COUNTERTOP WATER FILTER SYSTEM User Guide
Anchor Countertop Water Filter System is an attractively designed unit that sits on your countertop, connects to your kitchen faucet, and completes the filtration process Water flow is instantaneous, dispense the water you need and enjoy the refreshing taste right away.
Your Box Contains: Filter System* Wrench This User Guide Provides: - installation steps for all the Anchor Countertop Filter System Products - replacement steps for Anchor countertop filter cartridges Adapters + Gasket kit User Guide * Filter color and cartridge will depend on the order.
Know Your Filter Various parts of the filter Direction of flow of water Specifications Attribute Value Temperature Range 40°F - 100°F Service Flow 1 gpm Rated Capacity 1500 gallons (AF-3000/3200 - 800 gallons) Operating Pressure 20 - 90 psi Product Dimensions 4.75“L x 5.75“W x 12.75"H Faucet Dimensions 9”H x 3.
Installing Your Filter We have made it easy for you to install the Anchor Countertop Water Filter. The shipped unit comes pre-installed with filter cartridge, faucet, diverter valve, and tube. The only thing you need to do is to connect the diverter valve to your faucet and start enjoying the clean refreshing water. This is the diverter valve Twist & Turn Type Steps for installation: 1. Remove existing aerator from the faucet. Note the threads in your faucet.
b. Faucet with inside thread - enclosed adapter ring and gasket must be used If your faucet has non-standard threads, try the supplied universal adapter or purchase a special adapter from your local hardware store. After setting up the faucet, do the following: 1. Place the filter unit in a convenient location with the spout positioned over your sink. The spout is designed to swivel. 2.
Replacing the Filter Cartridge 1. 2. 3. 4. 6. Turn off water. Unscrew the housing from base by turning it counterclockwise using the supplied filter wrench. Note: If the housing seems stuck, soak base of the housing for 10 minutes in a mixture of hot water, and a little vinegar. Remove the old cartridge and discard. At this point, it is recommended to clean the housing from inside. Check the O-ring for wear & tear.
Register Your Product Give yourself complete peace of mind and register product online to receive timely reminders for filter replacements & for quick support. Register here: https://www.anchorfilters.com /product-registration OR Technical Support At Anchor USA, we are always here to help you. With 24-hour access to our company contact web page, you can drop a message or email us directly anytime, and one of our representatives will respond to your query in less than 24-hrs. Web: https://www.
