UNDER COUNTER WATER FILTER SYSTEM Quick Setup Guide Model# AF-4003
Your box contains: Faucet Box Filter Assembly Quick Fitting Elbow Connector Feed Water Adapter with accessories Red & blue tubing Wrench Use Guide Know your filter Stage 3 Stage 2 Stage 1 Specifications ATTRIBUTE VALUE Temperature Range 40°F - 90°F Service Flow 1.
Tools & Materials Required for Installation • • • • Drill with 1/2″ Drill Bit (type as required) if faucet needs to be mounted Adjustable Open-End Wrenches Phillips and Flat Blade Screwdrivers Feed water supply valve and adapter Installing your filter IMPORTANT - - Install or store where it will not be exposed to temperatures below freezing or exposed to any type of weather. Water freezing in the system will damage it. - Recommended installation is under the sink.
- Do not install on HOT WATER. Temperature of water supply to the filter system must be between minimum of 40°F and maximum of 90°F. - The assembly can stand up in the sink cabinet or can be hung on screws. - Use PTFE (Teflon) tape for the fittings and do not overtighten. COLOR CODE FOR TUBING Use the color-coded tubing to make connections as follows: A. Red tubing connects water supply adapter to inlet side of the assembly B.
Faucet Connection 1. Carefully select the faucet location making sure: • the faucet base fits flat against the surface at the selected location so the gasket will seal. • the faucet stud will be accessible from below once the hole is completed. 2. Use an existing predrilled hole on sink or drill one of ½ inch diameter. 3. Slide Escutcheon chrome plate and large rubber gasket onto stem of faucet and place faucet onto sink with stem going through the hole. 4.
Connection to the Filter Assembly Quick Fitting Your filter comes pre-assembled with filters. You only need to attach the quick fitting elbow connectors to inlet and outlet of the filter assembly and insert the tubes in these elbow connectors and the system will be ready for use. Remove the color-coded lock pins before inserting the tubes, and replace after you are done.
Replacing Filter Cartridge This filter system contains replaceable components called filter cartridges critical to efficiency of the system. Replacement of these cartridges should be with one of identical specifications to assure same efficiency and contaminant reduction performance. 1. Shut off the feed water to the system by turning the saddle valve on the water supply adapter clockwise until it stops. 2. Press down on faucet handle to relieve pressure. 3.
Register Your Product Give yourself complete peace of mind and register product online to receive timely reminders for filter replacements & for quick support. Register here: https://www.anchorfilters.com/pr oduct-registration OR Technical Support At Anchor USA, we are always here to help you. With 24-hour access to our company contact web page, you can drop a message or email us directly anytime, and one of our representatives will respond to your query in less than 24-hrs. Web: https://www.