Instructions / Assembly

Faucet connection
pieces mapping
3. Feed-Water Supply Installation
CAUTION: The water supply to the unit MUST be from the COLD-WATER
LINE. HOT WATER will severely damage your R.O. System.
1) Locate the cold water (angle) shut off valve (see picture below)
underneath the sink and turn it off. Open the cold-water faucet to
release the pressure. On single-handle kitchen faucets, the hot water
may have to be turned off to prevent any hot water cross over. If
water continues to come out of faucet with angled valve turned off,
the house main must be turned off.