User Manual

Set top weldment in center pole hole and connect to over-

lapping rings with shackles provided.

Place assembled pole cap over pipe of top weldment. At-

tach hinge pin to pipe extending through top of pole cap.

Rotate pole cap to align holes in pipes.

Note:

Pole cap assembly is illustrated on a separate sheet packed

with fabric top.

Alternate for Optional 8” Center Pole

attach with

hitch pin

Web to Winch

Start at side opposite wind. Insert each side

pole pin into side pole hole and raise slightly

less than perpendicular. Bottom of each pole

should be pointed inward toward center of

tent.

Wall ropes are to be outside of corner and

side pole.

Tie jump rope around each side pole as it is

inserted in pole hole.

Continue around tent.

Insert guy web loosely into slot in winch drum, approximate-

ly 4’-0” for 8’-0” side pole and 1’-6” for 10’-0” side pole.

Rotate drum 1 1/2 to 2 times to secure web.

Repeat at all guy web locations.

Raise Side Poles