User Manual

STEP 4: ALIGNING POOL COVER

1) Once cover is unfolded across pool, line up cutouts for ladders, slide legs, etc. and/or cable areas. Be

sure the cover aligns properly with these objects first. See important note on page 13.

2) Reposition cover to equal the overlap all around pool edge. Use buckets to keep cover taut.

3) If cable is needed, see Optional Cable Assembly Installation Instructions (pages 14 & 15).

Otherwise, proceed to STEP 5.

STEP 5: ATTACHING STAINLESS STEEL SPRING

1) Attach springs to web straps around cover.

2) Thread the web strap through the flat end of the spring and then back through the double

“D” rings attached at the covers edge. See illustration below.

DECK

COVER

CABLE

APPROX. 1’-5”

SPRING

WEB STRAP

“D” RINGS

COVER

SPA