INSTALLATION User guide

ManualsBrandsAnchor ManualsSports and recreationEVENT SERIES - PROFILE SIZE: 220MM X 100MM, INSTRUCTION SUPPLEMENT - WINDOW / HARD WALL

Please read all assembly / installation instructions before the installation or removal of this product.

WHW 1108

Assembly Instructions

Window/Hard Wall Installation

SALES OFFICES:

1100 BURCH DRIVE

PO BOX 3477

EVANSVILLE, IN 47733 USA

PRODUCTION FACILITIES:

EVANSVILLE, IN

PHONE: 812-867-2421

FAX: 812-867-0547

1-800-544-4445

EMAIL: tents@anchorinc.com

www.anchorinc.com

Wall Panel

ELEVATION

Outside View

Wall Base

Purlin

U-Channel with

Rubber seal (typ.)

Intermediate Post Assembly

with Adapter Fork and Pressure

Plate (typ.)

EC3811

Building Upright

(typ.)

Wall Panel Wall Panel

Wall Panel

Summary of content (4 pages)

PAGE 1
Assembly Instructions Window/Hard Wall Installation U-Channel with Rubber seal (typ.) Wall Panel Intermediate Post Assembly with Adapter Fork and Pressure Plate (typ.) Wall Panel Purlin Wall Panel ELEVATION Outside View Building Upright (typ.) Wall Panel Wall Base Please read all assembly / installation instructions before the installation or removal of this product.
PAGE 2
INSTALL KIT ASSEMBLY AND WALL PANEL INSTALLATION Building Upright and 1. Install the wall base equally spaced between the Base Plate uprights. Position the wall base so that the back lip Notch that is toward the interior of the tent. See Figure 1. receives Uchannel 2. Install the U-Channels in the uprights by engagBack lip ing the “L” leg into the outside kedar groove of the upright and rotating the U-Channel toward the interior of the tent until the flat portion of the “U” contacts To the upright.
PAGE 3
9. Install the second wall panel by placing it on the wall base and sliding the side between the intermediate post and the loosely installed pressure plate. Install the second intermediate post as noted above in step Intermediate post (without pressure plate) 5 and slide the intermediate post toward the wall panel until the leg of the post overlaps the wall panel Wall Base approximately ¾”. Loosely install the pressure plate as described in step 8. 10.
PAGE 4
EVANSVILLE, INDIANA PHONE NUMBER 812· 867· 2421 FAX NUMBER 812· 867· 0547 Anchor products are of superior design and operate best within the parameters of these instructions. It is imperative that the instructions be carefully read and COMPLETELY FOLLOWED. Please read installation instructions before the installation or removal of this product. Installation instructions are available online at www.anchorinc.com or by calling 1-800-544-4445. CAUTION: 1.