Owner`s manual

TROUBLESHOOTING GUIDE
ANCHOR Audio, Inc. [phone]
100-0058-000 / Revision D - 05/03
Having trouble with the PA system?
Condition Possible Cause
No sound (power LED not lit): • power switch OFF
• batteries fully discharged (LED flashes briefly)
Charge indicator doesn’t light: • confirm proper charger; replace if necessary
No sound (power LED lights): • no output from source
• input cable unplugged
• input volume control low or off
Shortened battery life: • short in external speaker cable or speaker
• total external speaker impedance < 8Ω
• batteries not fully charged
• batteries need replacement
Distorted sound: • poor connection on input cable
• input signal too strong
Excessive hum or noise: • input cable not shielded
Having trouble with the wireless system?
Condition Possible Cause
No sound (RX ON indicator lights): • wireless volume control low or off
• no mic plugged into belt-pack transmitter
No sound (RX ON indicator off): • sound system not turned on
• transmitter power switch turned off
• low battery or no battery in transmitter