Owner`s manual

SYSTEM SETUP
5
Daisy-Chaining
By using the Line Output method described above you can connect
up to six powered MegaVox Pro PA Systems together expanding
your coverage area.
Daisy-Chain Setup
To connect your MegaVox Pro units, use a shielded cable with 1/4”
phone plugs on each end (EX-50PP).
1. Turn the power switch off and turn the volume to maximum
on each MegaVox Pro.
2. Connect the Line Out on the primary (first) MegaVox Pro to
the Line In on the next MegaVox Pro.
3. Continue connecting your powered MegaVox Pro systems
Line Out to Line In to complete your chain.
4. Power on the speakers in order, primary unit first. This will
avoid speaker popping which can cause damage.
5. Use the volume control on the primary unit to set the volume
for the entire chain.
6. Power off speakers in reverse order, primary unit last. This
will avoid speaker popping which can cause damage.
NOTE:
Auditoriums
or outside
areas with
large exposed
walls or
patios may
create multiple
reflections of
the original
sound.
Altering the
PA system
position will
minimize the
sound
reflections.
MegaVox Pro
Daisy-Chain
Secondary
Powered
MegaVox Pro
Line Out - to - Line In Connection
Primary
Powered
MegaVox Pro