Instructions / Assembly

12
Range Hood Operations:
Control Panel Layout and Buttons Configurations:
LED Light
Indicator
LED Speed
Indicators
Light Control Speed Control
Power Control
(On/Off)
This range hood is equipped with six electronic controls, oversized powerful centrifugal squirrel cage
motor with stainless steel baffle filters and spacers, two bright 3W LED lights.
The six electronic buttons control the intensity of the Lights, Speeds (Quiet, Low, Medium and High) and Power
(On/Off). The Power Control (On/Off) offers startup, 3-minute delay or immediate power-off. The Light Control
operates independently from the Power Control (On/Off) and is not affected by the delay shutoff.
Turning Fan ON:
Always turn fans ON before cooking to establish air flow and allow fans to run for a few minutes after cooking
for cleaner air in the kitchen. The Power Control (On/Off) button must be pressed before a Speed Control button
can be activated. NOTE: The light setting will not be affected by the Power Control (On/Off) button.
• Press the Power Control (On/Off) button once. The four LED Speed Indicators above the Speed Control will
flash, if a Speed Control button is not pressed within 10-seconds, power will be turn OFF automatically.
• While the LED Speed Indicators are flashing, press a Speed Control button to activate the desired speed (the
LED Speed Indicator above the botton will light up.
• To change the fan speed, press another Speed Control button. The LED Speed Indicator above the speed but-
ton will light up accordingly.
Turning Fan OFF:
The 3-minute power-off delay function will only turn OFF fans. The light settings will not be affected by the delay
function.
Three-Minute Delay
• While the fans are operating, press Power Control (On/Off) button once, the LED Speed Indicator for the
active speed will flash and fans will turn OFF after 3-minutes.