Installation Guide

Replacing the light bulbs:
This range hood uses halogen bulbs: 35W 120V Type GU-10
1. Make sure the electrical power to the range hood is turned off. Please note that the light bulbs may
be hot. Allow enough time to let the light bulbs cool off before attempting to change them.
2. Attach the black rubber suction piece, included with
your range hood, to the outside glass part of the bulb.
Press the bulb inwards. DO NOT push too hard
as bulb “legs” may break off. (See Fig #9)
3. Turn the bulb counter-clockwise as you continue
to press inward. Release your pressure on the lamp
when it won't turn any farther. Gently pull the bulb
straight out of the socket. You may need to wiggle
it gently to get the cylindrical "feet" aligned correctly
with the larger openings in the socket. (See Fig #10)
4. Discard the old bulb. Line the prongs on the new bulb
up with the wide openings on the socket. Press inward
on the edges of the new lamp with your thumbs and twist
the lamp clockwise as far as it will go.
5. Turn the electricity and range hood on and test for operation.
Fig #9
Fig #10