User Manual

— 13 —
Installation
STEP 13
Install Upper Chimney
• Remove the protective lm from the upper chimney.
Carefully slide the upper chimney inside the lower
chimney.
• Extend the telescopic upper chimney until it reaches
the upper chimney bracket and attach the upper
chimney to the bracket using the provided screws.
• Peel off protective lm from the rest of the range hood.
STEP 14
Install Filters
•
Place two rubber pads on opposite side of each
filter handle.
Align the upper chimney
bracket with the range hood
below.
•
Holdthebafflefilterbytheknob.
• Placethefrontofthebafeagainsttheinteriorfront
of the range hood.
• Slide it up and push the rear of the lter back until it
sits securely.
•
Thebafflefilterschannelgreasereleasedbycooking
andpreventflamingfoods on the cooktop from
damaging the inside of the rangehood.Forthis
reason,thebafflefiltersmust ALWAYS be installed
during range hood use.
•
Thebafflefiltersshouldbecleaned once a month, or
as needed. See page 15 for cleaning instructions.