Use and Care Manual

5. Store excess wires in the wiring box.
6. Drop oil tunnel into recess support near rear of hood. Refer to Figure 8.
7.
To install baffle ſlters and stainless spacer(s), refer to Bafƀe Filters and Stainless Steel Spacers on Page 18
for baffle ſlter and stainless spacer placement. Refer to Figure 9 for the following three steps:
8. Repeat Step 7 to install all bafƀe ſlters and stainless spacers.
9.
Turn power ON in control panel. Check all lights and fan operations.
10. Make sure to leave this Installation Guide for the homeowner.
Figure 6
Figure 8
Installation (Continued) :
Page 11
Figure 9
Angle baffle filter toward back of hood.
Slide the knob toward the metal filter handle and push up.
Release the knob until it fits into resting positions.
Figure 7