Use and Care Manual

— 13 —
Installation
STEP 10
Mount Range Hood Onto Wall
• Hang the range hood on the hooks of the lower
mounting bracket. (See Figure # 3)
• Screw the range hood to the wall.
CAUTION - Make certain the range hood is
secure before releasing!
STEP 12
Install Chimney
• Place chimney on top of the main housing.
• Remove the protective coating from the upper chimney. Carefully slide the upper chimney down into the lower chimney.
• Use 2 screws to x the two chimneys together with the lower chimney bracket, make sure upper chimney is moving
freely. (See Figure # 4)
• Screw the upper chimney to the upper mounting bracket. (See Figure # 5)
Fig #1
Fig #3
Fig #4
Fig #5
STEP 11
Connect Ductwork
• Attach ductwork to damper. Secure the ductwork with duct tape to make sure joints are secure and air- tight.
• Donotinstalltheducttapetootightlyasthismaypreventthedamperapsfromopeningwhichwilloverworkthemotor
and cause improper functioning of the unit.
• Fasten all connections with sheet metal screws and tape all joints with certied aluminum or foil tape. Use caulking to
seal exterior wall or roof opening around the cap.