Instructions / Assembly

• Any additions, changes or conversions required in order for this appliance to satisfactorily meet

the application needs must be made by a qualified service technician in accordance with the

manufacturer’s instructions and all codes and requirements of the authority having jurisdiction.

Failure to follow the instructions could result in serious injury or property damage. The qualified

agency performing this work assumes responsibility for the conversion.

Liquefied Petroleum (Propane) Gas

Conversion

• This appliance can be used with Natural Gas and Propane (LP) Gas. It is shipped from the factory

for use with natural gas.

• A kit for converting to LP gas is supplied with your cooktop. The kit is marked “FOR LP/ PROPANE

GAS CONVERSION”. For conversion, follow the installation instructions which are in this manual.

• The conversion must be performed by a qualified service technician in accordance with the kit

instructions and all local codes and requirements. Failure to follow instructions could result in serious

injury or property damage. The qualified agency performing this work assumes responsibility for the

conversion.

Surface Cooking

Flame Size

• For most cooking, start on the highest control setting and then turn to a lower one to complete the

process. The size and type of utensil used and the amount of food being cooked will influence the

setting needed for cooking.

• For deep fat frying, use a thermometer and adjust the surface control knob accordingly. If the fat is

too cool, the food will absorb the fat and be greasy. If the fat is too hot, the food will brown so quickly

that the center will be undercooked. Do not attempt to deep fry too much food at once as the food will

neither brown nor cook properly.