Installation Guide

WARNING

Failure to make the appropriate conversion can result in serious personal injury and property

damage.

TOOLS YOU WILL NEED FOR CONVERSION

Wrench

7mm Nut Driver Safety Glasses

Small Flat-head Screwdriver (2 to 2.4 mm or 3/32″ tip size, 60 mm long)

A. ADJUST THE REGULATOR

a) Disconnect all electrical power, at the main circuit breaker or fuse box.

b) Shut off the gas supply to the cooktop by closing the manual shut-off valve.

c) Adjust the pressure regulator by doing the following:

1) Unscrew the regulator cap with the wrench (see Figure 19).

Figure 19