Installation Guide

— 13 —
Installation
Tools and Additional Parts Needed
Tape measure Phillips screwdriver Flat blade screwdriver
1/8”atbladescrewdriver
Hexscrewdriver Level Handorelectricdrill
Wrench or pliers Pipe wrench 15/16”combinationwrench
1/8”(3.2mm)drillbit(forwoodoors) Marker or pencil Pipe-joint compound resistant to
LP gas
3/16”(4.8mm)carbide-tippedmasonry
drillbit(forconcrete/ceramicoors)
Noncorrosive leak-detection solution
For Additional Parts:
Check local codes, consult gas
supplierandcheckexistinggas/
electricalsupply.See“Electrical
Requirements”and“GasSupply
Requirements” sections.