Full Product Manual
— 23 —
Installation
STEP 8
Connect to AC
DANGER:
• PleasemakesuretoreadALLsafetyprecautionsonpages4to10.
• ElectricalShockHazard.
• Donotuseanadapter.
• Donotuseanextensioncord.
• Failuretofollowtheseinstructionscanresultindeath,fire,orelectricalshock.
• Electricalconnectionmustbeperformedbyaqualifiedservicetechnicianinaccordancewiththekitinstructions
and all local codes and requirements.
• Thesafetycircuit-breakerandtheelectricalsystemmustbeabletowithstandtheloadoftheappliance.Seerating
label on back of range.
• Ratingplateislocatedonbackofrangeshouldyouneedtoverifyanyoftheelectricalrequirements.
• Thepowersupplysystemshouldhaveagroundconnectioningoodworkingorderinaccordancewiththe
regulations in force.
•
The electrical socket must be easily accessible with the appliance installed. In all cases, the power supply lead must
be positioned so that it does not reach a temperature of 50°C (122°F) above the room temperature at any point.
• Themanufacturerisnotliableforanydirectorindirectdamagecausedbyfaultyinstallationorconnection.Itis
therefore necessary that all installation and connection operations are carried out by qualified personnel, complying
with the local and general regulations in force.
Connecting to the AC Plug Connecting Directly to the Wall
u
— 23 —
WARNING:
• Neverusereductions,shunts,oradapterswhich
can cause overheating or burning.
• MakesuretheACSupplycabledoesnotcomein
contact with any parts or components that get hot.
u
Units include standard NEMA
14-50P plug. (See Figure 29)
v
Open push out hole. Disconnect cables and insert
through hole. (See Figure 31 A)
w
Connect cable with conduit and connect tube.
Screw tightly on each side of part. (See Figure 31
B)
Remove plate from the rear end of the Range.
Unscrew the two screws and set aside. (See
Figure 30)
Figur
e 30
Figure 29
Figure 31
A
B