How to Guide

ManualsBrandsAncona ManualsBathroomAezzo Polished Chrome 2-Handle Widespread Bathroom Sink Faucet

Widespread Lavatory Bathroom Faucet

STANDARDS

Tools:

PLUMBERS PUTTY FLASHLIGHT BASIN WRENCH

SAFETY GLASSES SCREWDRIVER

PLIERSCHANNELLOCKS ADJUSTABLE WRENCH

HEX-KEY TAPE

Attention:

Helpful Information

Important

Arezzo

2020-03-13 MAAN4342-2

SEALED-TUBE

Please keep the tools for future use!

ASME A112.18.1/CSA B125.1

ASME A112.18.2/CSA B125.2

LISTED IAPMO/cUPC

Gather the necessary tools as shown below to complete the installation of

this faucet. Some may not be needed depending on the model of faucet you

are installing. Check with your local hardware store on the requirements of

your installation situation.

WARNING:

For easy installation, you will need:

- To read all the installation instructions completely before beginning.

- To read all the warning, attention and maintenance information.

- To purchase the proper supply lines.

Tighten connection with two wrench to prevent

damage to tube body. Be careful not to bend the

stem as this will void the product warranty.

Connect to water supply lines with either

risers with the coupling nuts or

supplied tube head interior connector or

A. B. C.

1.2 gpm/4.5 L/min

Summary of content (4 pages)

PAGE 1
Helpful Information Tools: Arezzo Widespread Lavatory Bathroom Faucet STANDARDS ASME A112.18.1/CSA B125.1 ASME A112.18.2/CSA B125.2 LISTED IAPMO/cUPC Gather the necessary tools as shown below to complete the installation of this faucet. Some may not be needed depending on the model of faucet you are installing. Check with your local hardware store on the requirements of your installation situation.
PAGE 2
Installation size map Faucet Installation 4.4 in. (11.3 cm) 6.75 in. (17.2 cm) 4.3 in. (11.1 cm) 4.9 in. (12.6 cm) 1 2.1 in. (5.5 cm) 6.5 in. (16.6 cm) 3.3 in. (8.5 cm) 2.1 in. (5.5 cm) 3.5 in. (8.9 cm) Position the body with o-ring on the installation surface as shown, secure it with gasket assembly and tighten the lock nut with adjustable wrench. Ø 1.1 in. (3 cm) 1.1 in. (3 cm) Ø 1.1 in. (3 cm) Ø 1.1 in. (3 cm) Ø 1.1 in. (3 cm) 1/2-14NPSM 8 - 12 in. (20.3 - 30.
PAGE 3
Checking and Testing 3 5 Remove the aerator. Turn the faucet handle all the way on, turn on hot and cold water supply and flush water lines for one minute. Reinstall aerator. Position the flexible hose and fix it to the faucet as shown with clamp spring. 6 Check all connections at arrows for leaks, retighten if necessary. 4 BUT DON’T OVERTIGHTEN Connect the water supply lines to faucet and water supply valve and tighten with wrench.
PAGE 4
Cleaning and care Parts list NO. Daily cleaning and care are required in order to keep the product shining and working properly. 1. 2. 3. 4. Clean it with water and dry it with soft cloth. Clean the product with gentle liquid or glass cleaner. Don't use acid cleaner. Don't clean with abrasive material, abrasive paper or knife.