Installation Guide

Properly hang towels
Operation and maintenance instruction
• After installation, connect the electric power and turn on the switch. The indicator light will show
red and the towel warmer will start to work.
• Turn off the switch when the towel warmer is not in use. The indicator light will turn dark and the
towel warmer will stop working.
• Clean the towel warmer with a soft dry towel. Do not clean with abrasive cleaning powder.
•
Towel warmers are designed for heating towels and bathrobes and should not be used for other purposes.
•
The manufacturer or reseller assumes no liability if the device is used in combination with equipment or
accessories not sold by the manufacturer.
•
Never stand, sit or climb on the unit.
•
The unit is designed to warm up towel and may become very hot .
•
An adult must supervise when the device is used by or near children.
•
Unplug the unit and ensure that the electrical circuit breaker is off the main panel before wiring, carrying out a
repair or servicing your heated towel warmer.
•
Do not place your towel warmer inside a shower, sauna or plunge into the water.
•
To ensure continued protection against risk of electric shock, plug the unit into a properly grounded outlet.
•
Approved for domestic use only. Do not use outdoors.
Information : [e-mail]
Model : Ancona Comfort 7
PROPERLY HANG TOWELS