Prima Dual XL Towel Warmer User Manual & Installation Instructions IMPORTANT SAFETY INSTRUCTIONS Carefully read the important information regarding installation, safety and maintenance. Keep these instructions for future reference.
Required Tools STARHEAD SCREWDRIVERS FLAT HEAD SCREWDRIVERS DRILL & BIT MEASURING TAPE 5/16” Diameter LEVEL PENCIL Electrical requirements: 120V, 150W, 60Hz, 1.25A. MUST HAVE A GROUND CONNECTION. Should be protected by a 15 amp GFI circuit breaker or equal. READ ALL INSTRUCTIONS IN THE MANUAL BEFORE INSTALLING THIS TOWEL WARMER. Before You Begin Unpack the towel warmer carefully to avoid any damage or loss of any part.
Product Dimensions 12.4 cm (4.8 in.) 5.5 cm (2.1 in.) 48.05 cm (18.9 in.) 50.8 cm (20 in.) 114.6 cm (45.1 in.) 13.9 cm (5.4 in.) 5.7 cm (2.25 in.) 94 cm (37 in.) Parts for Plug-In Wall Mount Installation x4 x4 x4 x4 M8x15 x4 ST4.
Plug-In Installation w x Parts for Hardwire Wall Mount Installation x4 x4 x1 x4 x4 M8x15 x4 ST4.
Hardwire Installation w x y U —5— All electrical connections in the junction box must be performed by a fully qualified electrician.
Operation and Maintenance Instructions • • • • After installation, connect the electric power and turn on the switch. The indicator light will show red and the towel warmer will start to work. Turn off the switch when the towel warmer is not in use. The indicator light will turn dark and the towel warmer will stop working. When cold, clean the towel warmer with a soft dry towel. Do not clean with abrasive cleaning powder. Unplug the unit if not in use for a long period of time.
Chauffe-serviettes double Prima XL Manuel de l'utilisateur et instructions d'installation INSTRUCTIONS IMPORTANTES DE SÉCURITÉ Lire attentivement l’importante information concernant la sécurité, l’installation et l’entretien. Conserver ces instructions pour référence future.
Outils nécessaires TOURNEVIS ÉTOILE TOURNEVIS PLAT PERÇEUSE ET MÈCHE RUBAN À MESURER 5/16 po de diamètre NIVEAU CRAYON Exigences électriques : 120V, 150W, 60Hz, 1.25A. BRANCHEZ L'UNITÉ DANS UNE PRISE ADÉQUATEMENT RELIÉE À LA TERRE. Cet appareil doit être protégé par un disjoncteur différentiel de fuite à la terre de 15 ampères ou l'équivalent. LIRE TOUTES LES INSTRUCTIONS DANS LA SECTION INSTALLATION DE CE MANUEL AVANT D'INSTALLER LE CHAUFFE-SERVIETTES.
Dimensions du produit 12,4 cm (4,8 po) 5,5 cm (2,1 po) 48,05 cm (18,9 po) 50,8 cm (20 po) 114,6 cm (45,1 po) 13,9 cm (5,4 po) 5,7 cm (2,25 po) 94 cm (37 po) Pièces pour installation murale de la fiche x4 x4 x4 x4 M8x15 x4 ST4.
Installation de la fiche w x Pièces pour le branchement mural x4 x4 x1 x4 x4 M8x15 x4 ST4.
Branchement w x y U —5— Tous les branchements électriques à la boîte de jonction doivent être effectués par un électricien qualifié.
Instructions de fonctionnement et d’entretien • • • • Après avoir terminé l’installation, brancher le fil électrique et mettre l’interrupteur à «ON». L’indicateur s’allumera en rouge et le chauffe-serviette se mettra en marche.. Mettre l’interrupteur à «OFF» lorsque l’appareil n’est pas utilisé. L’indicateur s’assombrira et l’appareil s’éteindra. Lorsque l'appareil est froid, nettoyez-le à l'aide d'une serviette douce et sèche. N'utilisez pas de produit nettoyant abrasif sous forme de poudre.