Imperia OBT Towel Warmer User Manual & Installation Instructions IMPORTANT SAFETY INSTRUCTIONS Carefully read the important information regarding installation, safety and maintenance. Keep these instructions for future reference.
Required Tools STARHEAD SCREWDRIVERS FLAT HEAD SCREWDRIVERS DRILL & BIT MEASURING TAPE 5/16” Diameter LEVEL PENCIL Electrical requirements: 120V, 110W, 60Hz, 0.917A. MUST HAVE A GROUND CONNECTION. Should be protected by a 15 amp GFI circuit breaker or equal. READ ALL INSTRUCTIONS IN THE MANUAL BEFORE INSTALLING THIS TOWEL WARMER. Before You Begin Unpack the towel warmer carefully to avoid any damage or loss of any part.
Product Dimensions 91.4 cm (35.9 in.) 76.2 cm (30 in.) 22 cm (8.6 in.) 11.2 cm (4.4 in.) 42 cm (16.5 in.) Ø 3.3 cm (1.3 in.) Ø 3.2 cm (1.25 in.) 61 cm (24 in.) Ø 1.9 cm (0.75 in.) 57.8 cm (22.7 in.) 7 cm (2.75 in.) 14 cm (5.5 in.) 5.2 cm (2 in.) 15 cm (5.9 in.) Ø 2.5 cm (1 in.) Parts for Plug-In Wall Mount Installation x4 x4 x4 x4 M8x15 x4 ST4.
Plug-In Installation w x Parts for Hardwire Wall Mount Installation x4 x4 x1 x4 x4 M8x15 x4 ST4.
Hardwire Installation w x y U —5— All electrical connections in the junction box must be performed by a fully qualified electrician.
Parts for Floor Mount Installation x2 x2 x2 x1 Floor Mount Installation —6— x1
Timer Operation Timer button + light icon On / Off button IMPORTANT • Please turn on towel warmer switch before using timer. • When product is operating, is ON. When product is OFF, is OFF. Operating Instructions 1. Make sure towel warmer main switch is ON. and the light will turn ON (See fig 2. Touch #1), towel warmer will start to work and keep working continuously. area once, one light will turn ON 3. Touch (See fig #2), towel warmer will delay shut OFF after 2 hours.
Operation and Maintenance Instructions • • • • After installation, connect the electric power and turn on the switch. The indicator light will show red and the towel warmer will start to work. Turn off the switch when the towel warmer is not in use. The indicator light will turn dark and the towel warmer will stop working. When cold, clean the towel warmer with a soft dry towel. Do not clean with abrasive cleaning powder. Unplug the unit if not in use for a long period of time.
