Assembly Instructions

UNPACKING THE DEHUMIDIFIER

Use the cut line on the carton to pulll carton off dehumidfier�

INCLUDED IN THE CARTON

• Dehumidifier

• Installation manual

• Hanging brackets

• Model A77 control

• 3/4" P-Trap

• 3/4" MNPT x 3/4" hose barb fitting

• 3/4" MNPT x 3/4" female pipe

• 3/4" FNPT x 3/4" female pipe

• 10 feet of 3/4" clear PVC flexible drain hose

• Terminal screwdriver

• 30 feet of thermostat cable

• MERV 11 filter

MIN.

INLET SIDE

ELECTRICAL

SERVICE PANEL

90-2434

FIGURE 2 – SPACE CLEARANCES

LOCATION CONSIDERATIONS

This appliance is classified as to not be accessible to the general public�

The dehumidifiers should be spaced evenly throughout the area to be

dehumidified with the following recommendations:

1. Avoid placement where the discharge of one dehumidifier is

pointing toward the inlet of another�

2. Avoid locating the dehumidifier inlet too near a supply register�

Space is not usually available to totally avoid this, but minimizing

the amount of cold air that is discharged to the dehumidifier inlet

will improve moisture removal performance of the dehumidifier�

3. Account for handling dehumidifier condensate by considering drain

or sump pump locations�

4. Leave appropriate room on the drain side of the dehumidifier for

wiring and service�

5. Allow sufficient space near the inlet (6" minimum) to be able to

remove/install a filter� More space ensures no loss of airflow due to

restriction at the inlet�

4 English