User Manual

Learning Instructions
Note: All keys on the RRST01.2 may are learnable. Original remote is needed.
This method does not require codes.
1. Press and hold the & keys simultaneously for about 5 seconds;
indicator light will illuminate brighter and remain bright. Release the keys.
2. Point the original remote control head-to-head with the RRST01.2,
aligning top edges at about 1-2 inches apart (both remotes should be
pointing at each other).
3. On the RRST01.2, Press and release the first key to be learned, the
indicator light will now flash slowly.
4. On the original remote, press and hold the key that you want to learn to
the corresponding key previously pressed on the RRST01.2. The indicator
light will flash three times to confirm and then remain on, waiting for the
next key to learn.
5. Repeat steps 2-4 to learn other keys.
6. Press & keys simultaneously to save and exit, otherwise remote
will exit automatically after 20 seconds.
Example: Learning the POWER key from an original remote to the POWER key
of the RRST01.2.
First, on the RRST01.2 press and hold & keys simultaneously for 5
seconds, release the keys (indicator light will remain on and bright). Press and
release the key on the RRST01.2 (indicator light will now blink). Align both
remotes facing each other head-to-head. Press and hold the key on the