Installation Guide

9
a
1. Open the door and then let it close. Note the speed at which the
door closes.
2. Using a Phillips head screwdriver to adjust the closer to the
desired speed:
For a faster closing speed, turn the adjustment screw to the left
(counterclockwise).
For a slower closing speed, turn the adjustment screw to the
right (clockwise).
3. Test the speed at which the door closes after each adjustment.
Adjust the screw more, if needed, to achieve the desired door
closing speed.
ADJUST
CLOSING
SPEED OF
DOOR
Closer and door shown
are for reference only.
7
Tools needed:
Storm door will close more quickly when entry door is open. To achieve the proper closing speed, you will need to adjust
the closer(s) using the built-in adjustment screw. Check for safe closing speed with your entry door in both the closed and
the open position. To prevent injury, make sure people and/or pets are completely through the opening before allowing
the storm door to shut freely.
WARNING
!
!
1/2”
1/2”
1/2”
1”
1 1/2”
2”
1 1/2”
5/8”
5/8”
i
VIEW
Tools needed:
FILE
EDGE
SEAL
(Left Hand)
8
Generously round the bottom corner of the edge seal with a metal le to avoid sharp edges. Failure to round the bottom
corners may cause an injury.
WARNING
1. File the bottom corner
of the edge seal until it’s
smooth.
a
EDGE SEAL
JOINT DE REBORD
SELLO DEL BORDE
BOTTOM
PARTE INFERIOR
BAS
X
VIEW
E