Installation Guide

3
2. INSTALLATION PREPARATION:
Figure 7
Figure 8
EXTERIOR
VIEWS
In this step, you will remove the insect screen and shipping clip.
Lay the door at on a protected surface with the exterior side down.
TIP: Lay on door carton.
Remove the insect screen by lifting it up and then away from the
shipping clip (Figure 5).
Remove and properly discard the shipping clip.
Using your ngers, grasp the exposed retainer lip (Figure 6).
TIP: To prevent kinks and damage to the side retainers, do not pull
straight up on them.
Pull the side retainer towards the center of the door frame, working
along the entire length of the side retainer.
Remove the glass panel and set aside. Stand the glass panel on its
edge to prevent damage to it.
Left Hinged (Figure 7) - From the exterior, a left hinged storm door
will have the hinge rail on the left side of the storm door. Refer
to the illustrations in the column on the left side of the installation
guide under this heading:
Right Hinged (Figure 8) - From the exterior, a right hinged storm
door will have the hinge rail on the right side of the storm door.
Refer to the illustrations in the column on the right side of the
installation guide under this heading:
1.
2.
3.
4.
5.
6.
7.
8.
Figure 6
Figure 5
In this step, you will remove the side retainers and glass panel.
5
10
CARTON
2
14
INTERIOR SIDE UP
INTERIOR SIDE UP
LEFT hINGE
RIGhT hINGE
LEFT hINGE
RIGhT hINGE