Instructions / Assembly

• Frames are manufactured for left or right hand operation (L or R) or stationary sidelights. Door operation is as
viewed from the outside.
• Provide a large work area when assembling patio door frame. Cover work area with cardboard to protect
frame parts.
• Following frame assembly, attach screw pack envelope, with remaining screws, to frame for use when
installing unit frame and door panels on the job site.
Masonry/Concrete Installations Only
Acid solutions used to wash masonry/concrete will damage glass, fasteners, hardware, and metal flashing.
Follow the acid solution manufacturer's instructions carefully. Protect and/or cover Andersen
®
products
during cleaning process to prevent acid contact. If acid does come in contact with unit, immediately wash all
surfaces with clean water.
DO NOT install unit directly on masonry/concrete surface. Place a full length barrier (i.e. treated wood, tar paper,
ice/water membrane) between unit sill and masonry/concrete surface. Failure to use barrier and sealing it to
masonry/concrete surface and unit sill may result in product and/or property damage. Entire barrier must be
sealed to masonry/concrete surface to help prevent water infiltration. Barrier thickness must not exceed 1/4”.
Optional Accessories
• Corrosion Resistant
Screw Kit
• Insect Screen
• Sill Support
• Exterior Keyed Lock
• Auxiliary Sill Lock
• Interior/Exterior Grilles
• Oak Threshold
Tools & Supplies
• Safety Glasses
• Level
• Phillips Screwdriver
• Caulk Gun
• Sealant
• Clamps
• Shims (waterproof)
• Small Wood Block
• Hammer
• Drill/Driver
• 1/16" Drill Bit
Parts Included (All Doors)
(1) Installation Guide
(1) Head Installation Flange
(2) Side Installation Flanges
(1) Sill
(1) Head Jamb
(1) Left Side Jamb
(1) Right Side Jamb
(1) Head Flashing
(1) Silicone Sealant
(1) Screw Pack
(2) Side Stops
(1) Stationary Panel
Interlock Weatherstrip
(1) Operating Panel
Interlock Weatherstrip
(1) Head Bracket
(2) Stationary Panel
Interlock Weatherstrip
(2) Operating Panel
Interlock Weatherstrip
(2) Head Bracket
2-Panel Door
4-Panel Door
Stationary Sidelight
Additional Parts
Additional Parts Required
• Door Hardware
Frame Assembly and Installation Guide
2